Light Sculptures & Cinderella Carriages

One-off illuminated landmarks — carriages, arches, tunnels, spheres and completely bespoke sculptures — engineered, prototyped and fabricated under one roof.

Overview

Light Sculptures & Cinderella Carriages

Sculpture projects are engineering projects with a theatrical brief. Before a single LED is wrapped we produce a 3D model, run a structural check on the armature and simulate the light layout, because a 6 m carriage that cannot be lifted by the crane on site, or that sags in the middle after three weeks, is a failure regardless of how it looked in the render.

Our signature pieces — Cinderella carriages, walk-through arches and pixel tunnels — are produced in modules so they can be transported, assembled and later re-used. Pixel-controlled versions run content from Art-Net, MADRIX or an on-board SD-card show, allowing a city or mall to change the animation each season without new hardware.

Light Sculptures & Cinderella Carriages
20models in this range
Where it is used

Applications

  • Public squares and parks — signature sculptures and walk-through tunnels
  • Mall atriums — suspended spheres, arches and photo-op carriages
  • Tourist attractions — permanent illuminated landmarks with show content
  • Events and festivals — modular pieces that can be re-used each season
Specification notes

What to specify

  • 3D modelling, structural calculation and light simulation before fabrication.
  • Materials: galvanised steel, aluminium, FRP and CNC-formed scrollwork.
  • Pixel and DMX control with media-server or SD-card playback for animated content.
  • Modular construction with cable management, lifting points and base design.
  • CE certification and structural report supplied with the shipping documents.
  • Custom-made to your requirements — size, colour, artwork and control options.
The range

20 Light Sculptures models

Every model below can be produced to your own specification — sizes, colours, voltage and control. Products with a full specification page are linked.

Explosion Star Light Arch — Landmark Display
IP65Custom
SC-STAR — Light Sculptures

Explosion Star Light Arch — Landmark Display

A sweeping star-burst arch paired with an eight-point explosion star — the entrance landmark that frames a plaza's main photo moment. Fully built to customer drawings.

Arch span: 3 m – 12 m, custom to plaza widthStar diameter: 1–3 m eight-point explosion star, customFrame: Welded steel, hot-dip galvanised or powder-coated
MOQ 1 set
LED Sailing Boat Light Sculpture
IP65Landmark
SC-BOAT — Light Sculptures

LED Sailing Boat Light Sculpture

Full-hull sailing ship wrapped in warm-white and gold LEDs with lit mast and flag — a plaza centrepiece that anchors the whole theme. Custom hull art on request.

Length: 3 m – 10 m, custom to siteHeight incl. mast: 3–8 mStructure: Steel frame, modular bolt-together sections
MOQ 1 set
Giant Gingerbread House Light Sculpture — Walk-In
IP65Walk-in
SC-GING — Light Sculptures

Giant Gingerbread House Light Sculpture — Walk-In

A walk-in gingerbread house wrapped in blue and ice-white LED with candy-cane, heart and snowflake decorations — the themed photo landmark for mall courts and town squares. Candy art and colours fully custom.

Height: 3–5 m ridge, custom to siteFootprint: 3–6 m × 3–5 m, walk-in interiorStructure: Steel frame, modular bolt-together panels
MOQ 1 set
Giant Bauble Arch — Christmas Ornament Light Sculpture
IP65Entrance
SC-BAUB — Light Sculptures

Giant Bauble Arch — Christmas Ornament Light Sculpture

A golden Christmas bauble split into an arch with an ice-white tree silhouette — an entrance piece that frames walkways in malls, garden centres and retail streets. Colour pairing and cut-out motif to order.

Diameter: 2 m / 2.5 m / 3 m, customDesign: Bauble arch with tree cut-out, two-colour themeFrame: Welded steel rod, gold / silver powder-coated
MOQ 1 set
Snowman & Crescent Moon Arch — Walkway Entrance
IP65Custom
SC-MOON — Light Sculptures

Snowman & Crescent Moon Arch — Walkway Entrance

A gold crescent-moon arch dressed with snowflakes and baubles, paired with a 3D string-light snowman — a photo-friendly entrance pair for promenades and town squares. Fully built to customer drawings.

Arch span: 3–8 m, custom to siteHeight: 3.5–6 mElements: 3D snowman 2–4 m, snowflake & bauble accents
MOQ 1 set
Ornamental Swirl Light Arch — Event & Plaza Entrance
IP65Events
SC-WED — Light Sculptures

Ornamental Swirl Light Arch — Event & Plaza Entrance

Baroque scrollwork arch in gold and ice white over lit plinths — an elegant walk-through frame for park gates, wedding venues and hotel entrances. Scroll pattern and size to order.

Height: 3.5–6 mWidth: 3–5 m, customStyle: Baroque swirl scrollwork, gold / ice-white two-tone
MOQ 1 set
Red Ribbon & Bauble Arch — Park Centrepiece
IP65Landmark
SC-RED — Light Sculptures

Red Ribbon & Bauble Arch — Park Centrepiece

Sweeping red ribbon arches spiralling around giant lit baubles — a bold, high-impact centre piece for winter parks and city light trails. Colour scheme and bauble art to order.

Height: 3–6 m, customDesign: Triple spiral ribbon arch with giant bauble ornamentsOrnaments: 1–2.5 m baubles, star / snowflake cut-outs
MOQ 1 set
Walk-In Gift Box Light Tunnel — Photo Moment
IP65Walk-in
GB-WALK — Light Sculptures

Walk-In Gift Box Light Tunnel — Photo Moment

A life-size gift box visitors step inside for photos — the most shared Christmas installation for malls and town squares.

Size: 3 m / 4 m / 5 m cube, walk-through openingLED: Rope light + LED string, red bow motifFrame: Powder-coated steel, bolted segments
MOQ 1 set
Giant Tinsel Gift Box Light Sculpture
IP65Custom colours
GB-CUBE — Light Sculptures

Giant Tinsel Gift Box Light Sculpture

Classic wrapped-present sculpture in red, white and blue tinsel with light-up bow — plaza, mall and showroom centrepiece.

Size: 1 m / 1.5 m / 2 m / 3 m cubeLED: LED string on tinsel mesh, LED bowColours: Red / white / blue / gold, custom
MOQ 1 pc
Gift Box & Bauble Street Display Set
IP65Scene set
GB-SET — Light Sculptures

Gift Box & Bauble Street Display Set

Tilted gift boxes, baubles and candy pieces arranged as a street-corner scene — a complete story display out of the crate.

Set: 3–5 pieces: gift boxes, baubles, candy, treeHeight: 1.2 m – 2.5 m per pieceLED: LED string + neon flex outlines
MOQ 1 set
Gift Box Entrance Arch — Walkway Gateway
IP65Gateway
GB-ARCH — Light Sculptures

Gift Box Entrance Arch — Walkway Gateway

Gift-box-shaped gateway arch spanning a walkway — visitors walk through the ribbon into the display area.

Opening: 3 m / 4 m / 5 m wide × 3.5–4.5 m highLED: Warm white string + red bow motifFrame: Steel, base plates or ground anchors
MOQ 1 set
LED Tiered Fountain — Ice White Cascade
IP653–6 m
FT-TW — Light Sculptures

LED Tiered Fountain — Ice White Cascade

Three-tier ice-white cascade fountain with dotted water-jet drops — the classic town-square centrepiece that reads as a frozen fountain at night.

Height: 3 m / 4 m / 5 m / 6 m, customTiers: 2–4 cascade tiers with arched water jetsLighting: 5 mm concave LED + rope light, ice white / warm white
MOQ 1 set
LED Tiered Fountain — Royal Blue Cascade
IP65Landmark
FT-TB — Light Sculptures

LED Tiered Fountain — Royal Blue Cascade

Royal-blue tiered fountain with a lit centre column — the colour cities choose for winter light trails and waterfront promenades.

Height: 3 m / 4 m / 5 m / 6 m, customTiers: 2–4 cascade tiers, centre column optionsLighting: 5 mm concave LED + rope light, royal blue / ice white two-tone
MOQ 1 set
LED Tiered Fountain — Golden Cascade
IP65Signature
FT-TG — Light Sculptures

LED Tiered Fountain — Golden Cascade

Warm-gold tiered fountain with arched jets — the warm, festive reading for shopping streets, hotel forecourts and casino districts.

Height: 3 m / 4 m / 5 m / 6 m, customTiers: 2–4 cascade tiers with arched water jetsLighting: 5 mm concave LED + rope light, warm gold
MOQ 1 set
LED Column & Umbrella Fountain — Golden Jet
IP65Compact
FT-CG — Light Sculptures

LED Column & Umbrella Fountain — Golden Jet

A tall golden umbrella-jet column over a shallow bowl — compact footprint, strong vertical presence for plaza corners and medians.

Height: 2.5 m / 3.5 m / 4.5 m / 6 mForm: Umbrella jet column over bowl basinLighting: 5 mm concave LED + rope light, warm gold
MOQ 1 set
LED Arch Fountain — Ice White Water Jets
IP65Ground feature
FT-AW — Light Sculptures

LED Arch Fountain — Ice White Water Jets

Arched water-jet fountain in ice white with a lit centre spout — the walk-around ground feature for plazas, roundabouts and park lawns.

Diameter: 3 m / 4 m / 5 m / 6 mHeight: 2.5–4.5 m incl. centre jetJets: 6–12 arched jets around a centre column
MOQ 1 set
LED Arch Fountain — Blue Water Jets
IP65Photo point
FT-AB — Light Sculptures

LED Arch Fountain — Blue Water Jets

Blue arched water jets around a white centre spout — the cooler, modern reading for waterfronts, winter festivals and tech-park entrances.

Diameter: 3 m / 4 m / 5 m / 6 mHeight: 2.5–4.5 m incl. centre jetJets: 6–12 arched jets, blue / white two-tone
MOQ 1 set
LED Dome Cascade Fountain — Curtain Dome
IP65Overlay
FT-DW — Light Sculptures

LED Dome Cascade Fountain — Curtain Dome

A dome of falling LED curtain strands over a real or dry fountain basin — snowflake and motif overlays available for a themed season.

Diameter: 4 m / 6 m / 8 mHeight: 3–6 m domeEffect: Falling curtain strands, snowflake / motif overlays
MOQ 1 set
LED Ground Swirl Fountain — Decorative Jets
IP65Low profile
FT-SG — Light Sculptures

LED Ground Swirl Fountain — Decorative Jets

Low, walk-past swirl and arch jets in blue and ice white — the decorative ground layer for medians, verges and building frontages.

Height: 1.2 m / 1.8 m / 2.5 mSpread: 2–5 m per unit, row installation supportedJets: Swirl curls and arched jets, blue / ice white
MOQ 1 set
RGB Colour-Changing Tiered Fountain
IP65RGB
FT-RGB — Light Sculptures

RGB Colour-Changing Tiered Fountain

Multi-colour tiered fountain with per-tier colour control — one unit that re-dresses itself for Christmas, Lunar New Year and Eid.

Height: 3 m / 4 m / 5 m, customTiers: 2–4 cascade tiersLighting: RGB LED, per-tier colour control, steady or chasing
MOQ 1 set
FAQ

Light Sculptures — common questions

What do you need from us to quote a custom sculpture?
A rough sketch or reference image, the approximate size, the site location (indoor or outdoor, exposed or sheltered) and the intended season of use. We then return a concept render, a price range and a production timeline.
Can the sculpture be animated?
Yes. Options range from simple chase effects to full pixel mapping with synchronised music, and we can supply the media player and content programming.
How long does a custom sculpture take?
15–20 days for fabrication after design approval on most pieces; complex or pixel-mapped projects are quoted separately with a confirmed date. Allow extra time for a physical sample on complex pieces — we will tell you at the quotation stage whether a sample is advisable.
What are the trade terms?
Prices are quoted EXW (ex-works) our Zhongshan factory. We can arrange sea, air or courier shipping on your behalf, to your port or to your door — freight and destination charges are for the buyer’s account. Payment is 30% deposit with the order and 70% balance before loading. Production takes 15–20 days on most pieces; anything more complex is confirmed with your quotation.
Next step

Send us your specification

Light Sculptures & Cinderella Carriages — tell us sizes, quantities, colours and your destination market, and we reply within 12 working hours with pricing, lead time and packing details.